VAREX IMAGING XRD 1642 AP3 DIGITAL DETECTOR SYSTEM & XRD EOS POWER SUPPLY 215W

Varex Imaging (formerly PerkinElmer) XRD 1642 AP3 flat panel X-ray detector are listed below:
📊 Detector Specifications
ParameterSpecification
Sensor TechnologyAmorphous Silicon (a-Si)
Active Area41 cm × 41 cm (16" × 16")
Pixel Matrix1024 × 1024 pixels
Pixel Pitch400 µm
A/D Conversion16-bit ADC (65,536 grey levels)
Dynamic Range> 87 dB
Max Frame RateUp to 100 fps (via multiple read-out / binning modes)
X-ray Energy Range20 kV to 15 MV
Modulation Transfer Function (MTF)63% at 0.5 cy/mm | 31% at 1 cy/mm (with CsI scintillator)
Data InterfaceGigabit Ethernet (GbE)
🌍 Environmental & Electrical Requirements
  • Ingress Protection: IP-65 rated (dust-tight and protected against low-pressure water jets).
  • Operating Temperature: 10°C to 40°C.
  • Power Supply: External XRD-EPS power unit (100–240 VAC, 50/60 Hz, 215 W).
  • Design Feature: Radiation-hardened construction to protect the panel's interior components during high-energy industrial or oncology treatment cycles.